Provide a suggested price:





New
Free





Double-sided solar fence Next2Sun
Next2Sun GmbH has developed a mounting system for vertical installation of double-sided solar modules and is therefore the only company capable of developing and planning photovoltaic projects with this system. Our team can draw on a wide range of expertise. This allows us to offer our clients tailor-made solutions for each project. As an experienced and professional company, we are at your side as a reliable partner, designer or consultant.
Mounting system for ground photovoltaic installations
The sturdy steel structure consists of uprights and crossbars. Two uprights and three crossbars hold two vertically positioned double-sided glass and glass modules. The total height of the reversible anchorage system is flexible and is usually about 3 meters above the ground. The frame design is designed for easy and flexible installation as well as long service life. In combination with the glass modules used in the system, this ensures a very long service life for the entire system. The system has been designed to meet high strength requirements, especially as a result of wind loads. Modifications for specific projects allow it to be used almost anywhere around the world. For small standardized systems, type tests are prepared in accordance with EN 1991.
The company's system is distributed by our subsidiary Next2Sun Mounting Systems GmbH.
Based on the Next2Sun standalone system for vertical installation of double-sided solar modules on an industrial scale, we have developed a double-sided solar fence. The sturdy steel structure consists of uprights and crossbars. Each of the two uprights and beams supports a double-sided glass and glass module as well as an adjustable railing piece at the bottom. The overall height of the double-sided fence system can be flexibly changed. The basic version has a height of 1.50 to 1.80 meters.
Aviaries are a must for ecological livestock farms. Therefore, use the possibilities of double-sided glass units in combination with our fencing system. This will turn your fence into an energy generator!
The reversible solar fence adapts to almost any terrain and can be easily installed on site with just a few screw connections. Also, zinc plating of the material surface provides additional protection against external influences. Compressed steel profiles provide a cost-effective base. Drilled and concrete foundations are also possible, taking into account local conditions.
The frame design is based on a vertical mounting system for large solar power plants and is designed for a long service life. The same is true for glass solar modules used in solar fencing. The system is designed to meet high strength requirements, especially as a result of wind loads. A corresponding type test is in preparation.
Flexibility in purpose and design:
Different basics
Selection of different railing elements for the lower part
Accessories for cable routing
Adding wire for an electric fence
Mounting profile, powder coated in various colors (optional)
Corner elements
Scope of delivery:
Fencing system project planning
Delivery of all installation material
Tamping / foundation construction
Assembling the frame and module
Electrical installation and commissioning
Special services (especially for large projects):
Certification according to DIN EN 1991
Confirmation of foundation in accordance with local conditions
Individual special solutions
Pre-planning:
Feasibility study
Investigations
Location analysis and assessment
Geodetic services and verification of terrain profiles
Yield Modeling
Project development:
Preparation and execution of documents for an application for approval
Initiation of all official requirements such as building permits, applications for subsidies, grid connection procedures, etc.
Negotiating and concluding lease agreements for securing a land plot
Plant planning (electrical, module allocation planning)
Plant design and implementation planning
Collaboration with local developers and designers
Monitoring concepts of regional participation
Construction services:
Purchase all installation materials such as modules, inverters, cables, plugs, etc.
Construction supervision and monitoring services
Configuring and installing monitoring systems
Mounting system for ground photovoltaic installations
The sturdy steel structure consists of uprights and crossbars. Two uprights and three crossbars hold two vertically positioned double-sided glass and glass modules. The total height of the reversible anchorage system is flexible and is usually about 3 meters above the ground. The frame design is designed for easy and flexible installation as well as long service life. In combination with the glass modules used in the system, this ensures a very long service life for the entire system. The system has been designed to meet high strength requirements, especially as a result of wind loads. Modifications for specific projects allow it to be used almost anywhere around the world. For small standardized systems, type tests are prepared in accordance with EN 1991.
The company's system is distributed by our subsidiary Next2Sun Mounting Systems GmbH.
Based on the Next2Sun standalone system for vertical installation of double-sided solar modules on an industrial scale, we have developed a double-sided solar fence. The sturdy steel structure consists of uprights and crossbars. Each of the two uprights and beams supports a double-sided glass and glass module as well as an adjustable railing piece at the bottom. The overall height of the double-sided fence system can be flexibly changed. The basic version has a height of 1.50 to 1.80 meters.
Aviaries are a must for ecological livestock farms. Therefore, use the possibilities of double-sided glass units in combination with our fencing system. This will turn your fence into an energy generator!
The reversible solar fence adapts to almost any terrain and can be easily installed on site with just a few screw connections. Also, zinc plating of the material surface provides additional protection against external influences. Compressed steel profiles provide a cost-effective base. Drilled and concrete foundations are also possible, taking into account local conditions.
The frame design is based on a vertical mounting system for large solar power plants and is designed for a long service life. The same is true for glass solar modules used in solar fencing. The system is designed to meet high strength requirements, especially as a result of wind loads. A corresponding type test is in preparation.
Flexibility in purpose and design:
Different basics
Selection of different railing elements for the lower part
Accessories for cable routing
Adding wire for an electric fence
Mounting profile, powder coated in various colors (optional)
Corner elements
Scope of delivery:
Fencing system project planning
Delivery of all installation material
Tamping / foundation construction
Assembling the frame and module
Electrical installation and commissioning
Special services (especially for large projects):
Certification according to DIN EN 1991
Confirmation of foundation in accordance with local conditions
Individual special solutions
Pre-planning:
Feasibility study
Investigations
Location analysis and assessment
Geodetic services and verification of terrain profiles
Yield Modeling
Project development:
Preparation and execution of documents for an application for approval
Initiation of all official requirements such as building permits, applications for subsidies, grid connection procedures, etc.
Negotiating and concluding lease agreements for securing a land plot
Plant planning (electrical, module allocation planning)
Plant design and implementation planning
Collaboration with local developers and designers
Monitoring concepts of regional participation
Construction services:
Purchase all installation materials such as modules, inverters, cables, plugs, etc.
Construction supervision and monitoring services
Configuring and installing monitoring systems
- Stock:
- Model: Next2Sun
$0.00
Ex Tax: $0.00